A log storage rack accomplishes several tasks when it comes to storing firewood logs. The rack keeps the logs off the ground, removing the transfer of moisture from the ground to the logs and allowing for better drying. The rack also organizes the wood and stores it neatly, making the area look more tidy and allowing more wood to be stored in a smaller area. The project can be built by do-it-yourselfers with basic carpentry skills and tools, according to Popular Mechanics magazine.
Instructions
Using a power saw, cut the construction-grade two-by-six lumber pieces to the following lengths: two at 6 feet long (which will be the sides of the storage rack), two at 16 inches long (the ends), four at 4 feet long (the uprights), two at 18 inches long (the tops) and four at 32 inches long (the storage rack braces). On the braces, cut a 45-degree angle on each end of the pieces.
Build the frame of the log storage rack. Fasten the 16-inch end pieces between the ends of the 6-foot sides, using three 3-inch deck screws at each connection. At this point you have a rectangle framework that will serve as the base of the log storage rack.
Fasten the uprights onto the interior of the four corners of the framework. The upright extends 6 inches beyond the bottom of the frame and each is fastened, using four 3-inch deck screws, perpendicular to the framework. Place the tops across the top of the uprights at each end. Use two 3-inch deck screws to fasten the top to each upright.
Set the log storage rack upright on a solid surface. Fasten the braces in place. The brace should fit flush against the inside of the upright and reach the ground to serve as additional support for the log storage rack. Use five 3-inch deck screws to fasten the brace to the side of the frame, and two additional 3-inch deck screws to fasten the brace to the upright.

?